ECO SOLAR BOOST EVO MPPT-4000 4KW

The ECO Solar Boost EVO series inverters are a new generation of renowned and valued devices that enable the direct use of photovoltaic panels to power heating devices. They were designed based on the extensive experience of our engineers and valuable customer feedback. Furthermore, thanks to the support of artificial intelligence in the design process, they are characterized by even greater reliability.

The EVO series offers an AC output with a maximum current of 16 A and an improved operating algorithm, allowing the inverter to perform efficiently even in low sunlight conditions, especially during sunrise and sunset.

The ECO Solar Boost EVO inverter allows you to power heating devices such as boilers, radiators, electric heaters, infrared (IR) heaters, and heating mats directly from PV panels.

The system is simple to build and requires only an inverter, several standard 400–700 W PV panels connected in series or series-parallel, with a total voltage in the range of 120–300 V (Voc @ 25°C), and a 200–4000 W power source with a heater.

The direct current generated by the photovoltaic panels, which cannot directly power heating devices, is converted to alternating current in the inverter, allowing for safe power supply to the heating devices.

The inverter has a priority output 1 and a dependent output 2.

This allows for the connection of two heating devices, such as two boilers. The first one heats up first, while the second one starts operating when the thermostat of the first device stops drawing energy from the inverter.

WARNING! - Heating devices with electronic controllers can only be powered from output number 1.
Output number 2 is intended exclusively for heating elements with a bimetallic thermostat.

Input voltage (DC): 120 V ÷ 350 V
RMS output voltage (AC): 120 V ÷ 250 V
Output voltage frequency: 50 Hz
Output voltage waveform: modified sine wave
Maximum power: 4000 W
Maximum current: 16 A
Grid/panel transfer point: 40 V / 80 V (±5%)
PV panel connection: series or series-parallel
DC input power connector: MC4 - 1 set
AC output socket: type E (with pin) - 2 pcs.
Operating temperature: -25 °C ÷ 55 °C
Efficiency: > 97 %
Cooling: active (automatic regulation)
IP rating: IP21
MPPT function: yes
Thermal protection: 80 °C
Overload protection: yes
Short circuit protection: yes
Overvoltage protection: yes
Supports resistive loads: yes
Supports capacitive loads: no
Supports inductive loads: no
Housing: aluminum
Dimensions (L x W x H): 315 x 170 x 80 [mm]
Weight: 1.9 kg